When using ultra-high molecular weight polyethylene sheets, you need to pay attention to the following points:
Preparation before installation: Before installation, ensure that the base of the ultra-high molecular weight polyethylene sheet is free of debris and dust, especially the metal surface must not have dirt such as oil stains, otherwise it will affect the strength and life of the connection surface. If the ambient humidity is greater than 80% or the temperature is lower than 5°C, it is not recommended to use this product.
Handling and storage: When handling ultra-high molecular weight polyethylene sheets, be careful and gentle to avoid severe vibration and impact. During transportation, they should be stored away from corrosive items to ensure that their quality is not damaged.
Environmental control: Ultra-high molecular weight polyethylene sheets should be kept away from heat sources and direct sunlight to reduce the brittleness of the product and improve the temperature resistance level. At the same time, control the changes in temperature and humidity to avoid the adverse effects of expansion and contraction.
Installation process: Before installation, ensure that the surface is clean and dry, and remove oil and dust. During installation, ensure that the position is correct and the force is evenly applied to avoid deformation or damage. After fixing, check the material to ensure that it is firm and undamaged.
Use and maintenance: During use, avoid contact with hard or sharp objects to prevent scratches. Check wear regularly and maintain and replace in time. Avoid being in a high temperature environment for a long time to prevent plastic deformation and reduced impact resistance.
Cutting and fixing: Cut the sheet according to actual needs, laser cutting or mechanical cutting can be used. Use screws or glue to fix the sheet on the mounting surface. After installation, the PE sheet needs to be cleaned regularly to keep it clean and dry.